The StatMatic I microplate washer and bottle top dispenser provides a convenient and affordable alternative for diagnostic assays and cell culture work. Used with an eight-port disposable manifold, the StatMatic I microplate washer and bottle top dispenser provides continuous operation not possible with multi-channel pipettes.
Eight-port manifold, designed for 96-well microplates, delivers fluids in volumes of 100, 200, 250, or 300 μL with well-to-well accuracy of 5% or better.
Constructed of polypropylene, Teflon®, glass, and ceramics, there is no exposed glass that can break and requires minimal maintenance.
Compatible with most reagents and chemicals and designed so that even protein-based reagents won't cause sticking.
Filtered air vent keeps liquids free of contaminants.
Priming line allows recirculation into the dispenser port without removing the bottle.
The StatMatic I microplate washer and bottle top dispenser is available to retail customers in any quantity and to OEM customers in quantities of 200 or more, with each packaged individually. OEM customers also have a selection of custom printing and labeling choices.
Specifications
StatMatic
StatMatic I
StatMatic II
Volumes
Cat# 401, 50 µL - 250 µL Cat# 981, 0.5 mL - 2.5 mL
Cat# 982, 0.8 mL - 2.4 mL
Cat# 980, 0.8 mL, 1.6 mL, 2.0 mL or 2.4 mL w/Manifold
Precision (CV) Accuracy Per Well
≤ 1% (full stroke) ± 1%
≤ 5% (full stroke) ± 5%
2.4 mL & 2 mL ≤ 1% ± 3% 300 mL & 250 mL
1.6 mL ≤ 2% ± 4% 200 mL
0.8 mL ≤ 3% ± 9% 100 mL
Dimensions (instrument only) Length Handle Diameter Unit Weight Shipping Weight
6.75 in. [17.15 cm] .795 in. [2.02 cm] 1.3 oz [36.85 gm] 6.3 oz [178 gm]
7.25 in. [18.41 cm] .795 in. [2.02 cm] 1.5 oz [42.52 gm] 6.5 oz [184 gm]
8 in. [20.32 cm] .795 in. [2.02 cm] 1.1 oz [31.18 gm] 9.8 oz [278 gm]
20 mm, 24 mm, and 28 mm threaded adapters, 7 in. inlet tubing, 4.5 in. outlet delivery tubing, 25 in. remote delivery tubing, volume calibration rings and Operating Instructions.
3 dispense volume spacers, 20 mm, 24 mm, and 28 mm threaded adapters, flexible remote outlet tubing, long inlet tubing, 8-port manifold, manifold vertical holder and Operating Instructions.
500 mL plastic bottle with 28 mm cap assembly, bottle inlet tubing, luer fitting, 3 dispense volume spacers, 30 in. long Tygon® remote inlet tubing and Operating Instructions.
Accessories
Cat# 790 125 cc HDPE bottle with tubing inlet and adapter Cat# 822 8-port Manifold non sterile/disposable, polypropylene Cat# 925 Fixed outlet tubing
Cat# 790 125 cc HDPE bottle with tubing inlet and adapter Cat# 822 8-port Manifold non sterile/disposable, polypropylene
A Return Material Authorization (RMA) number must be issued by TriContinent before any products are returned. The RMA number must be referenced on the outside of the shipping box. TriContinent does not accept the return of products for credit/refund without prior approval. Unauthorized returns will be refused. TriContinent reserves the right to refuse a return on any product that has been used with infectious microbiological or radioactive substances or other materials that may be deemed hazardous to the employees of TriContinent.
Repair
TriContinent will repair or replace any product that is defective due to material or workmanship within a period of one year after shipment from TriContinent. Products returned for abuse and misuse will be repaired at the customers expense.
TriContinent reserves the right to charge a minimum repair charge for products returned within the warranty period for complaints that can not be verified by TriContinent.
Rework
Rework or modification to a previously purchased item will be at a negotiated price.
Exclusions
Some defects may be an exception to the one year warranty policy. Please contact your Sales Representative or Customer Service for details on your product.
The above warranty shall not apply for defective products resulting from:
Improper or inadequate maintenance by the customer
Unauthorized maintenance or service
Customer misuse
Operation outside of the environmental specifications for the product
Units returned without proper packaging
It is the responsibility of the customer to determine the suitability of an application and the material compatibility of the products.
Global (EN)
