Syringe pump basepump
BasePump Syringe Pump
BasePump Syringe Pump
BasePump Syringe Pump front
BasePump Syringe Pump 45 degrees
BasePump Syringe Pump
Syringe pump basepump
BasePump Syringe Pump
BasePump Syringe Pump
BasePump Syringe Pump front
BasePump Syringe Pump 45 degrees
BasePump Syringe Pump
Back to the product list

BasePump
Syringe Pump

TriContinent offers a selection of BasePump syringe pumps designed to meet the broad needs of the market. A variety of valves, piston seal designs, and syringe barrel sizes provide a convenient selection at a reasonable price. Each TriContinent BasePump syringe pump is manufactured under stringent quality control standards that produce syringe pumps recognized in the industry for their reliability and accuracy. Time-tested and proven in the field, TriContinent BasePump syringe pumps provide a low-cost alternative to in-house or customized syringe pump designs.

Contact Us
Request a Quote Request Service, Parts or Support
Share

Description

BasePump Syringe Pump with No Valve

The most basic TriContinent pump offers a smart alternative to custom designs or an excellent, affordable replacement option for manufacturers who have previously built their own syringe pumps. The stepper motor/leadscrew syringe pump integrates time-tested mechanical and fluidic designs that serve in a variety of applications.


BasePump Syringe Pump with Valve

This syringe pump includes a drive motor for a shear valve. Designed to be the primary syringe pump in a two-syringe diluter system or a single-syringe diluter/dispenser, the BasePump syringe pump can be used with other syringe pumps to meet a wide range of liquid handling requirements.

Valves

The three-way valve has a polycarbonate body with a high-density polyethylene core and can last over 1,000,000 cycles in chemically compatible applications. A nylon valve body is also available.

See TriContinent’s AccuPump2 for an alternative syringe pump similar to the BasePump but with control electronics. AccuPump2 includes a TriContinent controller PCBA which provides ready-to-use interfaces for single or multiple syringe pump use.

Liquid-handling products and instruments certificates rohs

Specifications

Specifications

 

Driver Recommendation (min)
For Stepper Motor: BiPolar Chopper at 24 VDC
350 mA per phase or equivalent
SYRINGE DRIVE / MOTOR LEADSCREW DATA
STEPPER MOTOR
Travel / Full Step
0.000656 in. (7.5º step angle)
Resistance / Phase
9.1 ohm (each winding)
Inductance / Phase
16.7 mH (each winding)
Rated Current
550 mA
Rated Voltage
5V
VALVE MOTOR DATA
DC GEAR MOTOR:
Voltage
12 VDC Nominal (7-15 VDC)
Current (at nominal voltage)
< 0.90 mA (no load)
SYRINGE SPEED
User defined (500 steps/sec recommended maximum)
STEP RESOLUTION
Short Stroke
1000 steps full stroke for 50 μL - 500 μL syringes
Long Stroke
2000 steps full stroke for 2 mL - 10 mL syinges
Opto Sensors
H22A1 or equivalent
Electrical Interfaces
10-pin male dual row header
POWER REQUIREMENTS
Stepper Motor (for syringe drive)
User defined
DC Gear Motor (for valve drive)
User defined
Power Dissipation
User defined
Fluid Contact
Syringe Materials
Borosilicate Glass, PTFE, Polypropylene
Valve Materials 
Nylon Body & HDPE plug or Polycarbonate body & HDPEplug
Operating Temperature
15ºC to 40ºC (59ºF to 104ºF)
Operating Humidity
20 to 95% RH at 40ºC (104ºF)
Media Temperature
15ºC to 40ºC (59ºF to 104ºF)

Configured Options

 

Valves
BasePump for Diluent (with valve)
BasePump for Diluent (without valve)
Valve Materials
Nylon Body & HDPE plug or Polycarbonate body & HDPE plug
Syringe Sizes
Diluent Syringe Sizes - 500 μL, 2 mL, 5 mL, 10 mL
Single Port Sample Syringe Sizes - 250 μL, 500 μL, 2mL, 5 mL, 10 mL
Dual Port Sample Syringe Sizes - 50 μL, 250 μL

Functional Parameters

 

Imprecision (full stroke) at 50 μL to 250 μL
< 1.0% CV
Imprecision (full stroke) at 500 μL to 10 mL
< 0.5% CV
Innacuracy (full stroke)
< 1.0% syringe volume

Note: Above specs based on AccuPump2 control electronics. User results may vary depending on user's electronics and protocols.

Ordering Information

Please contact your TriContinent Sales Representative for current pricing.

Pumps

 

Catalog #
Description
802
BasePump, Sample
884
BasePump, Diluent

Syringes

 

Catalog #
Description
905
50 μL Dual Port Sample
904
250 μL Dual Port Sample
903
500 μL Diluent
902
2 mL Diluent
901
5 mL Diluent
900
10 mL Diluent
893
250 μL Single Port Sample
894
500 μL Single Port Sample
890
2 mL Single Port Sample
895
5 mL Single Port Sample
896
10 mL Single Port Sample

Plungers (5/Pack)

 

Catalog #
Description
779
50 μL for Dual Port Sample (2.740 L)
780
250 μL for Dual Port Sample (2.740 L)
783
250 μL Sample
781
500 μL Diluent or Sample
782
2 mL Diluent or Sample
805
5 mL Diluent or Sample
784
10 mL Diluent or Sample

Valves (10/Pack)

 

Catalog #
Description
785
Small Polycarbonate
983
Nylon

Syringe Holders

 

Catalog #
Description
891
for Diluent / Polycarbonate Valve 
889
for Dual Port Sample
892
for Single Port Sample
984
for Diluent / Nylon Valve

Downloads

Warranty

AccuPump and BasePump Warranty Information

TriContinent operates an ISO 13485 registered manufacturing facility that delivers the highest quality products. The BasePumps are general laboratory components not subject to FDA regulatory approval. TriContinent uses the highest quality components with applicable safety markings to meet the needs of system designers. BasePumps do not carry independent CE markings as they are components designed for use within larger systems which are subject to independent testing and certification.

We stand behind the BasePump with a 1-year warranty. During the warranty period, should a BasePump fail, call us with an explanation of malfunction and TriContinent will issue a Return Material Authorization (RMA) number for repair or replacement at our discretion, at no charge.

It is the responsibility of the customer to determine the suitability of an application and the material compatibility of our product with your application.

When returning a product for repair or replacement, please contact TriContinent Customer Service to receive an RMA number. When calling please be sure to have the following information available:

  • Catalog Number
  • Serial Number
  • Explanation of Malfunction

TriContinent will not accept the return of any product with out prior approval. TriContinent reserves the right to refuse a return of product that has been used with infectious microbiological or radioactive substances or any other materials that may be deemed hazardous.

The RMA number should be referenced on the outside of the shipping container when returning to TriContinent.

Warranty Exclusions

The above warranty shall not apply for defective products resulting from:

  • Improper or Inadequate maintenance by the customer
  • Unauthorizaed maintenance or service
  • Customer misuse
  • Operation outside of the environmental specifications for the product
  • Instruments returned withour proper packaging

There is no warranty expressed for the following components:

  • Valves
  • Syringes
  • Plungers / Seals

Note: For equipment damaged in shipping, please conact the shipper directly.